BMSGG - BUTTERCUT CUTTING COMPOUND, 5042

  • MSDS: BMSGG
  • Manufacturer: CROWN INDUSTRIAL PRODUCTS CO
  • Product Name: BUTTERCUT CUTTING COMPOUND, 5042
  • National Stock Number: 6850-00N028202
Product Identification

Product ID:BUTTERCUT CUTTING COMPOUND, 5042
MSDS Date:02/15/1989
FSC:6850
NIIN:00N028202
MSDS Number: BMSGG

Responsible Party
CROWN INDUSTRIAL PRODUCTS CO
STATE LINE ROAD
HEBRON, IL 60034
US

Emergency Phone: 815-648-2424

Info Phone: 815-648-2424 / FAX 815-648-4090

Preparer: ROBERT E. BAYTON

Cage: 92381

Contractor
CROWN INDUSTRIAL PRODUCTS CO
350 HEBRON, IL 60034 US

Telephone: 815-648-2424

Cage: 92381

Ingredients

ANIMAL FATTY OIL;(INEDIBLE LARD OIL)

CAS: 8016-28-2

Fraction By Weight: 70%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NON-HAZARDOUS-INEDIBLE LARD OIL.
INHAL:UNLIKELY SOURCE OF ENTRY. INGEST:INEDIBLE LARD OIL-CALL A
PHYSICIAN. EYE:NOT APPLICABLE. SKIN:NOT APPLICABLE. SKIN
ABSORPTION:NOT APPLICABLE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SAME AS EXPOSURE TO ANY ANIMAL OIL OR GREASE. EYE:WASH WITH
LARGE VOLUMES OF WATER FOR AT LEAST 15 MINUTES. SKIN:WASH WITH SOAP
AND WATER. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
ARTF/RESP) . INGEST:CALL A PHYSICIAN.

Fire Fighting

Flash Point:600F,316C
Extinguishing Media:FOAM OR CO*2
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TREAT AS GREASE OR OIL FIRE.

Accidental Release

Spill Release Procedures:CLEAN UP TO PREVENT ACCIDENTS. RAGS AND PAPER
SOAKED WITH FATS ARE SUBJECT TO SPONTANEOUS COMBUSTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:SAME AS ANY ANIMAL OIL OR GREASE.
AVOID EXCESSIVE HEATING AND COOLING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE NEEDED. NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Ventilation:LOCAL EXHAUST IS ADEQUATE.
Protective Gloves:NONE NEEDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING AND EQUIPMENT:SEE 29 CFR 1910.132
AND 133.
Work Hygienic Practices:WASH SKIN WITH SOAP AND WATER.
Supplemental Safety and Health
VP:100 MMHG AT 20C.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:666F,352C
Vapor Pres:SUPP DATA
Spec Gravity:0.91
Solubility in Water:ISOL.
Appearance and Odor:LIGHT AMBER/LARD OIL ODOR.
Percent Volatiles by Volume:NEG

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAMES, SPARKS, ELECTRICAL ARCS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.